Re: Client Request

Craig Nelson (cnelso2@cs.umbc.edu)
Sun, 18 May 1997 10:34:26 -0400 (EDT)


On Sun, 18 May 1997, C Matthew Curtin wrote:
> I believe the existing client labeled "6.2" (not the bitsliced
> client, but the other) will work OK on 5.3. Please try it and let us
> know if it doesn't work.

Nope. Doesn't work.

Script started on Sun May 18 10:33:15 1997
Awaiting Command
retriever% hinv
1 150 MHZ IP17 Processor
FPU: MIPS R4010 Floating Point Chip Revision: 0.0
CPU: MIPS R4400 Processor Chip Revision: 5.0
On-board serial ports: 4
Data cache size: 16 Kbytes
Instruction cache size: 16 Kbytes
Secondary unified instruction/data cache size: 1 Mbyte
Main memory size: 208 Mbytes
I/O board, slot F: IO3B
Integral Ethernet: et0, IO3
Integral SCSI controller 1: Version WD33C93A, revision 9
Disk drive: unit 7 on SCSI controller 1
Disk drive: unit 6 on SCSI controller 1
Disk drive: unit 5 on SCSI controller 1
Disk drive: unit 4 on SCSI controller 1
Disk drive: unit 3 on SCSI controller 1
Disk drive: unit 2 on SCSI controller 1
Disk drive: unit 1 on SCSI controller 1
Integral SCSI controller 0: Version WD33C93A, revision 9
Disk drive: unit 5 on SCSI controller 0
Disk drive: unit 4 on SCSI controller 0
Disk drive: unit 3 on SCSI controller 0
Disk drive: unit 2 on SCSI controller 0
Disk drive: unit 1 on SCSI controller 0
VME bus: adapter 0

retriever% d64 keyme aster.verser.frii.com
d64: Program not supported by architecture
retriever%
script done on Sun May 18 10:33:33 1997

--
   Craig Nelson - cnelso2@cs.umbc.edu - http://www.cs.umbc.edu/~cnelso2
"They give bonafide parnoids like myself a bad name" -Fox Mulder, "X-files"
-----------= Crack DES NOW!! http://www.cs.umbc.edu/~cnelso2/des =-----------